10
Operating the Projector
This section explains how to use the remote controller to perform projector operations.
To select the input source
1.
Press the [INPUT] key.
2.
On the “Input” dialog box that appears, use the [INPUT], [
] and [
] keys to
select the input source you want and then press the [ENTER] key.
If you do not press the [ENTER] key, the projector will automatically apply the currently
selected input source after about two seconds.
The name of the input source you selected will appear in the upper right corner of the
projection screen for a few seconds.
The message “No signal input” will appear if no input signal can be detected.
Resolution
This projector’s video resolution is fixed at XGA (1024 × 768 pixels). Images may appear coarse, text
and other figures may be difficult to read or a moire pattern may appear when the input signal from a
computer does not match the projector’s video resolution. If this happens, change the computer’s
output resolution setting so it matches the projector’s video resolution. See the user documentation
that comes with your computer for details about changing its settings.
Selecting the Input Source (INPUT)
Summary of Contents for Casio XJ-V2-UJ3000
Page 43: ...MA1511 A ...
