Casio 5623, Operation Manual

Page: 13 / 26

●
Configuring the Summer Time Setting
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Perform the operation shown on the
phone screen to select a summer time
setting.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
Note
●
While the summer time setting is
“Auto”, the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch’s summer time setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel auto
standard time/summer time switching.
●
G-SHOCK Connected screen shows
information about summer time
periods.
●
Swapping Your World Time and Home
Time
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
30 30
World Time City
(New York)
World Time City (Tokyo)
Home City (New York) Home City (Tokyo)
After swapping Before swapping
Note
●
Auto time adjustment does not work for
24 hours after swapping of the Home
Time and World Time.
Setting the Alarm
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Perform the operation shown on the
phone screen to configure alarm time
settings.
●
Change the alarm setting from off to on.
●
Set the hour and minute of the alarm
time.
Configuring Timer Settings
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Perform the operation shown on the
phone screen to configure the timer time
setting.
●
Set the hours and minutes of the timer
start time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use G-SHOCK
Connected to adjust them.
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Phone finder will not sound the tone
unless G-SHOCK Connected is
running on the phone.
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
Operation Guide 5623
13