Casio 5623, Operation Manual

Page: 14 / 26

1.
X Hold down (C) for at least one second.
This will cause the watch to enter the
Calendar Mode.
2.
X Hold down (D) for at least five seconds
until the second hand points to [C].
A connection will be established between
the watch and phone, and then the
phone’s ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
3.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
After establishing a connection between the
watch and a phone, you can use G-SHOCK
Connected to configure watch settings and to
view information acquired by the watch.
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l C Pair the watch with a phone.
●
Connecting with a Phone
1.
Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (D) for at least 0.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
●
Once the watch and phone are
connected, the connection is
maintained.
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK Connected is not running on
your phone. On your phone’s home
screen, tap the “G-SHOCK
Connected” icon. After the app starts
up, hold down the watch’s (D) button
for at least 0.5 seconds.
Unpairing
Unpairing the watch from a phone requires
both G-SHOCK Connected and watch
operations.
Note
●
If you are using an iPhone, also delete
the pairing information stored on the
phone.
●
Deleting Pairing Information from G-
SHOCK Connected
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to unpair.
●
Deleting Pairing Information from the
Watch
1.
X Hold down (C) for at least one second
to enter the Calendar Mode.
2.
X Loosen the crown and then pull it out to
the second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
30
Crown
Time zone
Summer time setting
3.
X
Hold down (D) for at least 10 seconds.
This deletes the pairing information. The
second hand will point to [C].
30
4.
X Push the crown back in and then lock it.
Operation Guide 5623
14