Casio 5623, Operation Manual

Page: 10 / 26

9.
Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
8 4
9 3
2
5 7
1
6
0
Year (one’s digit)
10.
Press (C).
This enables the month setting operation.
11.
Rotate the crown to change the month.
10
11
12
8 4
9 3
2
5 7
1
6
Month
12.
Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
●
Changing the day setting will cause the
mode hand to rotate repeatedly.
l
Hand and Day Indicator Movement
13.
Rotate the crown to change the day.
30
Day
14.
On a time signal at the top of a minute,
push the crown back in and lock it.
●
Configuring the Summer Time Setting
(Home City)
The watch’s current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
●
If the Home City time zone is an area
where time calibration signal reception
is possible, you can select [AT] (Auto)
for the summer time setting. While [AT]
is specified as the summer time
setting, the first time calibration signal
receive operation after the Home City
enters the summer time period will
cause the watch’s time setting to
switch to summer time. The first time
calibration signal receive operation
after the end of the summer time period
is reached will cause the watch’s time
setting to switch to standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
l
City (Time Zone) List
1.
Loosen the crown and then pull it out to the
second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
2.
Hold down (B) for at least one second.
Each time you hold down (B) for at least
one second, the summer time setting will
cycle to the next available option.
30
3.
Push the crown back in and then lock it.
Checking the Last Time
Adjustment Result
1.
Enter the Calendar Mode.
l
Navigating Between Modes
30
2.
Press (D).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
30
Second hand
Note
●
Even if there was a successful time
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
●
The time calibration signal receive
result will not be indicated after the
watch is paired with a phone.
Operation Guide 5623
10