4. CONTROL PANEL OPERATION
1. SPEED: Select one of three speeds to run the unit at..
SP1: 1,300 - 1,500 notes/min SP2: 1,000 – 1,200 notes/min SP3: 700 – 900 notes/min
2. PRESET: Provides selection of preset batch amounts. When you press this key, the values change in the following order
100
→
50
→
25
→
20
→
10
→
0
→
100…
You can also select any size batch using the numeric keys.
3. ADD: Provides a cumulative total of all counted notes.
Every time the unit completes a count, the cumulative total is shown on the count display
To use this function, press ADD key before placing notes onto hopper.
*Any batch that is interrupted or has an error, is not counted towards the total.
4. LEVEL: Density level key, 4 levels
AUTO
→
I
→
II
→
III
→
AUTO…
5. NUMERIC KEYS: Allows for batch selection using totals other than pre-programmed batches.
6. CLEAR: Clears the display for batch counting or when an error is displayed.
