Xiamen Cashino Technology Co.,Ltd
A3 User Manual
18
Code
ASCII
：
ESC & y c1 c2 [x1 d1 ... d (yx1)] ... [xk d1 ... d(y x k)]
DEC
：
27 38 y c1 c2 [x1 d1 ... d(yx1)] ...[xk d1 ... d(yxk)]
HEX
：
1B 26 y c1 c2 [x1 d1...d(y x1)]...[xk d1...d(yxk)]
Function
Define user customized characters.
y specifies vertical direction bytes.
c1 specifies the starting character encoding,c2 specifies the ending character
encoding
xk specifies horizontal direction dots.
Range
The range of x
、
y
，
are correspond with internal fonts.
If choosing Font 6*12
，
y = 2
，
0 ≤ x ≤ 6
If choosing Font 12*24
，
y= 3
，
0 ≤ x ≤ 12
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ d1 ... d(y*xk) ≤255
Default
None
Notes
Definable character code range:from<20>H to <7E>H ASCII code(95
characters)
。
It can define continuous characters encoding for several characters.When it need
one character only,make c1=c2.
d is character’s dot data,dot mode starts from left side in the horizontal
direction.It is blank for the rest dots in the right side.
Defined user defines characters data is (y*x) byte.
Set corresponding bit of printing dots as 1, or corresponding bit of no printing
dots as 0.
This command defines different customized characters for each type of font. Set
font with ESC !.
Customized characters and downlink bitmaps cannot be defined at the same
time. When the command is executed, the downlink bitmap is cleared.
User Customized characters will be cleared in these situations:
Execute ESC @
。
Execute GS *
。
Execute ESC ?
。
Printer reset or power off
Graphic:
When set font A(12 24).
