Xiamen Cashino Technology Co.,Ltd
A3 User Manual
36
Whatever the input data length is 6,7,8,11,and 12,the barcode readable
character(HRI) just show 6 as data,but excluded system character (NSC) and
check code;
The transition relation between transmission and printing data as below:
When d6 is 1~9,be sure d7,d8,d9,d10 are 0,and d11 is 5~9
Initial character,terminator automatically inserted
When print EAN13(m = 2 or 67),Please pay attention as following:
Whatever the input data length is 12 or 13,check bit is automatically
inserted or corrected
Initial character,central split character and terminator inserted
automatically
When print EAN8(m = 3 or 68),please pay attention as following:
Whatever input data length is 7 or 8,the check bit is automatically inserted or
corrected
Initial character,central split character and terminator inserted
automatically
When print CODE39(m = 4 or 69),please pay attention as following:
When d1 or dn are not Initial character/terminator ”*”, encoder is
automatically inserted ”*”
When middle of the data encounter ”*”, the encoder regard it as terminator,
the other data as the normal data;
The check bit could not calculate and add automatically
When print ITF25(m = 5 or 70), please pay attention as following:
Initial character and terminator inserted automatically
The check bit could not calculate and add automatically
When print CODABAR (NW-7) (m = 6 or 71),please pay attention as following:
Initial character and terminator could not inserted automatically,but manual
addition by user, that the range from “A”~”D” or “a”~”d”
Check bit could not calculate and add automatically
When print CODE93(m = 72),please pay attention as following:
Initial character and terminator inserted automatically
The two check code are automatically calculated and then inserted
