manualshive.com logo in svg

Cashino CSN-80V, User Manual, Page: 13 / 74

Share
Download
Cashino CSN-80V User Manual Download Page 13

CSN-80V User manual

13

In the process of using the printer, if you come across the phenomenon of paper jam,
please stop printing in time and power off the printer. The paper jam is usually caused by
the failure of the automatic cutting cutter head to fully back into the body of the paper
cutter after the paper cutting.

When the phenomenon of paper jam occurs, it usually causes paper cover to be unable to
open normally. At this time, please do not forcibly open the cover to avoid damaging to the
printer.

The paper jam exclusion method is as follows:
1. Power off the printer and remove all connecting wires connected to the printer;
2. Pull out the paper cutter cover horizontally and forward as shown in image 4;
3. Rotate the cutter wheel with your finger to rewind the cutter head into the cutter body;
4. Press the "paper cover switch" button vertically downward to open the paper cover and
remove paper jam;
5. If the printing and paper out are normal, then reinstall the paper cutter cover.

4.2 printer cleaning

When one of the following situations occurs to the printer, the print head should be
cleaned:
4.2.1 printing is not clear;
4.2.2 The printed page for a column is not clear;
4.2.3 The paper is making a lot of noise.

The cleaning steps of the print head are as follows:
(1) Power off the printer, open the top cover, if there is paper, remove it;
(2 If you have just finished printing, wait for the print head to cool completely;
(3) with a soft cotton cloth dipped in anhydrous ethanol (should be wring dry) wipe off the
print head of the thermal sensor surface dust, stains;
(4) wait for anhydrous ethanol completely volatilization, close the cover, retry printing.

Note:
1 daily maintenance of printers must ensure that the power supply is turned off;
2 do not touch the surface of the print head with your hands and metal objects, do not use
tweezers and other tools to scratch the print head, printing cots and sensor surface;
3 can not use gasoline, acetone and other organic solvents;
4 wait for anhydrous ethanol completely evaporated, then turn on the power supply to
continue to print.

Summary of Contents for CSN-80V











































































Reviews:

No comments