Power-Up Configuration Menu
To access the Settings menus, press and hold the Up <
> and Enter
<
>
keys
immediately following power up.
Scroll through the items until the desired function is highlighted and accept with the Enter
<
>
key. Use the scroll keys <
> and <
> again within the function to choose the desired
option and confirm with the Enter
<
>
key.
The information screen displays the pumps serial
number and firmware revision.
To maximise battery run time it is recommended that
the display is blanked during the sample run. The
Display timeout option specifies how long the display
remains visible. Press any key to wake the display
In application environments sensitive to Radio
transmissions (Medical, Military etc. The Bluetooth
radio maybe fully disabled.
For maximum simplicity, operate the pump with
Advanced mode off. Advanced mode enables
additional menus providing access to the Timer modes
and TWA functionality.
Select the displayed units for Temperature and
inlet Pressure measurements.
