Switching the Apex2 On and Off
To switch the Apex2™ on
, press the on/off key
. At power up, the pump will display the
start-up screens followed by the Stop mode screens detailing the last run data.
To power off
the Apex2 from any screen when the pump is not running, press and hold the
key for 3 seconds. Countdown screens will be displayed:-
Key Lock Modes
The Apex2 can be set to operate in Partial Lock or Fully Locked modes:
Whilst pressing and holding the Up <
> key, press the
enter key
<
>
3 times in quick succession to toggle
between the different ‘LOCK’ options.
Partial lock
is identified by the open padlock and may be
activated in both Run or Stop modes. In the partial Lock
mode the wearer may only start or stop a sampling run but
cannot access other menus or functions. The wearer is
prevented from resetting values or changing the flow rate.
Full lock
mode can only be activated once the pump is
already sampling in a run mode and is identified by a closed
padlock icon. In Full lock mode the keypad is fully de-
activated until it is unlocked again. The wearer cannot stop
the pump.
