Case Magnum 7210, Service Bulletin

Page: 5 / 26

Service Bulletin NTR SB 026 96
Magnum Hitch Diagnostic Codes and Service Manual update
Page 5 of 26
READING AND ERASING ERROR CODES
Start engine while holding hitch
switch in down momentary posi-
tion. Release switch when
q
appears. will appear now.
c l
NOTE: To quit the error scan at any
time, toggle to UP position-toggle to
DOWN position. Repeat until
appears, procedure is finished.
Toggle to UP position
will appear if no errors have
been recorded.
recorded, first code will appear now.
If any error codes have been
Toggle to UP position
Toggle to DOWN position
Down momentary
and release
c l
Next error code-
, -
Example only
.
Repeat down momentary and release
until or appears.
Toggle to UP position
Toggle to DOWN position
Down momentary
and release Will ill
repeat error scan
for second time.
Toggle to UP position
Down
Toggle
to DOWN position
momentary
and release
Finished
NOTE: Case Corporation reserves the right to make improvements in design or changes in
specifications at any time without incurring any obligahon to install them on units previously
sold.