Case CX490D, Operator'S Manual, Page: 100 / 370

3 - CONTROLS AND INSTRUMENTS
Machine status
Detailed machine conditions can be
checked.
The following items can be checked:
page
Machine information
ENGINE SPEED (min-1)
P1 PRESS. (MPa)
P2 PRESS. (MPa)
BATTERY VOLT. (V)
ENGINE PROTECTION FEATURE
1/3
ALTITUDE COMPENSATION
ACCUMULATED FUEL
CONSUMPTION (L)
ACCUMULATED DEF CONSUMP-
TION (L)
2/3
COOLING DOWN REMAINING TIME
(sec)
ENGINE OPERATION TIME (hr)
MACHINE OPERATION TIME (hr)
SWING OPERATION TIME (hr)
TRAVEL OPERATION TIME (hr)
BREAKER OPERATION TIME (hr)
3/3
CRUSHER OPERATION TIME (hr)
NOTE: press and hold the left and right buttons together
for 10 s , and the entire fuel history will be reset.
Engine protection feature: the machine monitors its en-
gine operation and, in case excessive load is applied, con-
trols the engine output for protection. "++++" indicates
that this function has been activated, "----", not activated.
Altitude compensation: the machine is equipped with
barometric sensor and, under the condition of extremely
low atmospheric pressure (ex. high altitude area), op-
timize the engine operation. "++++" indicates that this
function has been activated, "----", not activated.
SMIL15CEX0456AA
33
3-48