Case CX235C SR, Operator'S Manual

Page: 76 / 292

3 - CONTROLS/INSTRUMENTS
- If 3 min. elapse with the function cancellation lever
closed and without changing the engine speed, "Idle
shut down" is displayed on the monitor.
- About 10 sec. after "Idle shut down" is displayed, the
engine stops.
NOTICE: To protect the engine, at least 3 min. of idling
is required.
NOTE: To restart the engine, first set the ignition key to
“Off” , and then start the engine.
• In auto idling and auto stop,
“Auto n/min” and "Auto
stop" are displayed.
NOTE: If they are still selected when the engine is
stopped, they will remain active when the engine is
restarted.
8. Menu screen display switch
Press this switch to display the menu screen.
The menu contains the following items.
Language
Brightness (day)
Brightness (night)
Fuel consumption indicator
Maintenance information
Clock adjust
Auxiliary hydraulics
Camera setting
Use the switch shown in the diagram to select or a
change a menu item.
MUC8LU-026
2
Refer to page 3-26 for use.
9. Camera display switch
Press this button to switch between the machine
information screen, machine infor camera
joint display, and camera image independent display
(mode, travel mode, clock and warning only).
• Mode 1: Normal screen
MUC8LU-003Z
3
Machine information screen
• Mode 2: Camera screen
3PZT8U-003Z
4
Machine information plus camera joint display
• Mode 3: Camera screen without indicators
3PZT8U-004Z
5
Camera image independent display (mode, travel
mode, clock and warning only)
The 3 types above are available for selection.
10. Hour meter select/back monitor select switch
In the information screen, hour meter select is en-
abled.
"Trip" control (partial hour meter)
Used to calculate a specific operation time.
Press the control to set the hour meter display to 0
and display the "Trip" message.
Release the control.
After about 1 min., the "Trip" display disappears and
the normal hour meter display returns.
To view the specific operation time, press the control
and release it immediately.
3-24