Case CX17B, Service Manual

Page: 5 / 41

0-2
GENERAL SAFETY INFORMATION
Do not operate or perform any maintenance on this
machine until all instructions found in the OPERA-
TOR’S MANUAL and this MANUAL have been thor-
oughly read and understood.
Improper operation or maintenance of this machine
may cause accidents and could result in serious in-
jury or death.
Always keep the manual in storage.
If it is missing or damaged, place an order with an
authorized our Distributor for a replacement.
If you have any questions, please consult an autho-
rized our Distributor.
(1) Most accidents, which occur during operation, are
due to neglect of precautionary measures and safe-
ty rules. Sufficient care should be taken to avoid
these accidents. Erroneous operation, lubrication
or maintenance services are very dangerous and
may cause injury or death of personnel. Therefore
all precautionary measures, NOTES, DANGERS,
WARNINGS and CAUTIONS contained in the man-
ual and on the machine should be read and under-
stood by all personnel before starting any work with
or on the machine.
(2) Operation, inspection, and maintenance should be
carefully carried out, and safety must be given the
first priority. Messages of safety are indicated with
marks. The safety information contained in the
manual is intended only to supplement safety
codes, insurance requirements, local laws, rules
and regulations.
(3) Messages of safety appear in the manual and on
the machine : All messages of safety are identified
by either word of "DANGER", "WARNING" and
"CAUTION".
1)
DANGER-
Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury and is represented as
follows:
2)
WARNING-
Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury and is represented as
follows:
3)
CAUTION-
Indicates a potentially hazardous
situation which, if not avoided, may result in mi-
nor or moderate injury. It may also be used to
alert against possible damage to the machine
and its components and is represented as fol-
lows:
(4) It is very difficult to forecast every danger that may
occur during operation. However, safety can be en-
sured by fully understanding proper operating pro-
cedures for this machine according to methods
recommended by Manufacturer.
(5) While operating the machine, be sure to perform
work with great care, so as not to damage the ma-
chine, or allow accidents to occur.
(6) Continue studying the manual until all Safety, Oper-
ation and Maintenance procedures are completely
understood by all persons working with the ma-
chine.
Find manuals at https://best-manuals.com