Engine - Engine and crankcase
31. Install the breather line (hose and venting check valve)
to the engine. Tighten the clamp to
3.4 N·m
(
2.5 lb ft
)
LEIL17WHL0094AB
24
32. Install the ST, CPWR and battery positive cables
(1)
to
the engine starter. Torque the nut to
22.5 – 29.4 N·m
(
16.6 – 21.7 lb ft
).
Install the negative battery cable
(2)
, ground strap
(3)
and XM1C cable
(4)
to the engine starter.
Install the GND_ENG1, GND_ENG3, GND_ENG4 ca-
bles
(5)
and GND_CENG1, GND_CENG2 cables
(6)
to the engine. Torque the nuts to
22 – 24 N·m
(
16.2 –
17.7 lb ft
).
LEIL17WHL0114AB
25
33. Secure the cables to the engine with clamps.
LEIL16WHL0570AB
26
34. Install the heater supply hose
(1)
to the engine. Se-
cure the hose to the flywheel cover with clamp
(2)
and
existing hardware.
LEIL17WHL0115AB
27
48083741_EN 31/07/2018
10.1 [10.001] / 25
