Case 48083741, Service Manual

Page: 24 / 61

INTRODUCTION
Torque - Minimum tightening torques for normal assembly
Use the torques in this chart when special torques are not given. These torques apply to plain and zinc-dichromate
fasteners as received from suppliers dry, or when lubricated with engine oil. Not applicable if special graphite lubri-
cants, Molydisulfide greases, or other extreme pressure lubricants are used. A torque range of ±
10% is acceptable.
Grade 8.8 bolts, nuts, and studs
Size
Nm
lb ft
4 mm 4 N·m 3 lb ft
5 mm 7 N·m 5 lb ft
6 mm 12 N·m 9 lb ft
8 mm 29 N·m 21 lb ft
10 mm 57 N·m
42 lb ft
12 mm 100 N·m 74 lb ft
14 mm 159 N·m 117 lb ft
16 mm 248 N·m 183 lb ft
18 mm 352 N·m 260 lb ft
20 mm 500 N·m 369 lb ft
22 mm 681 N·m 502 lb ft
24 mm 865 N·m 638 lb ft
27 mm 1262 N·m
931 lb ft
30 mm 1719 N·m 1268 lb ft
36 mm 2999 N·m 2212 lb ft
Markings for Grade 8.8 hardware
Grade 10.9 bolts, nuts and studs
Size Nm lb ft
4 mm 5 N·m
4 lb ft
5 mm 10 N·m 7 lb ft
6 mm 17 N·m 13 lb ft
8 mm 41 N·m 31 lb ft
10 mm 82 N·m 60 lb ft
12 mm 143 N·m
105 lb ft
14 mm 227 N·m 168 lb ft
16 mm 354 N·m 261 lb ft
18 mm 487 N·m 359 lb ft
20 mm 690 N·m 509 lb ft
22 mm 942 N·m 695 lb ft
24 mm 1195 N·m 882 lb ft
27 mm 1749 N·m 1290 lb ft
30 mm 2377 N·m
1753 lb ft
36 mm 4149 N·m 3061 lb ft
Markings for Grade 10.9 hardware
48083741_EN 31/07/2018
19