Case IH PUMA 130, Service Manual

Page: 24 / 61

INTRODUCTION
Sulphur Content Oil Change Period
Below 0.5 % Normal
From 0.5 - 1.0 % Half the normal
Above 1.0 % One quarter normal
NOTE: The use of fuel with a sulphur content above 1.3 % is not recommended.
Coolants
WARNING
Hazardous chemicals!
Chemical agent may be harmful.
-Avoid contact with eyes, and prolonged/repeated skin contact.
-Wear protective goggles when handling.
-Eye contact: Flush with water for 15 minutes. Seek immediate medical assistance.
-Wash skin with soap and water after handling.
-Keep out of reach of children.
Failure to comply could result in death or serious injury.
W0370A
To reduce the amount of deposits and corrosion, the water used in the cooling system must comply with the following
values.
Total Hardness Chloride Sulphate
300 parts per million 100 parts per million 100 parts per million
Using Plain water
If you reside in a country where antifreeze is not available, use clean water premixed with 5 % chemical inhibitor. The
inhibitor is available from your authorised dealer.
Lubrications and Coolant Specifications
RECOMMENDED FLUIDS AND APPLICATIONS
CIH
SPECIFICATION
INTERNATIONAL
SPECIFICATION
ENGINE OIL
CASE IH AKCELA NO. 1 ENGINE OIL 15W-40
CASE IH AKCELA NO. 1 ENGINE OIL 10W-30
MS 1121
API CI-4,
ACEA E7
TRANSMISSION, REAR AXLE AND HYDRAULIC
SYSTEM OIL
CASE IH AKCELA NEXPLORE
FRONT AXLE (Axle and Hubs)
CASE IH AKCELA NEXPLORE
FRONT P.T.O GEARBOX OIL
CASE IH AKCELA NEXPLORE
MAT 3525
API GL4
(SAE 10W-30)
(ISO VG32/46)
ENGINE RADIATOR COOLANT
CASE IH AKCELA PREMIUM ANTI-FREEZE
(mixed with 50% of water)
MS 1710 Ethylene Glycol
BRAKE OIL
CASE IH AKCELA LHM FLUID n/a ISO 7308
AIR CONDITIONING COMPRESSOR OIL PAG-E13
Low Viscosity Oil SP10 n/a ISO100 Viscosity
GREASE FITTINGS AND BEARINGS
CASE IH AKCELA MULTI-PURPOSE GREASE 251H EP 251H EP NLGI2, Li-Ca
Regarding filling quantity - see Capacities ()
84479138A 06/06/2011
20