46
６
-
２
-
３
POS
Set
up the protocol and baud rate of the POS device.
６
-
２
-
４
Event Source
Navigate to
{Menu}
{Setup}
{Camera}
{Event Source}
.
(1) Motion Area
The user can setup the motion detection area.
Motion zones can also be created.
[Figure 6-45. Motion Area Setup]
①
Select Motion Area of each channel.
②
The view changes to 1-channel division mode, and rectangular boxes appear where motion may occur.
Drag the yellow pixel cursor with the mouse, front panel, or remote controller, and select pixels where
motion detection doesn't apply. The selected area will turn brown.
③
Select Exit to finish.
(2) Motion Sensitivity : Lowest/Low/Middle/High/Highest.
(3) Sound Sensitivity : Lowest/Low/Middle/High/Highest
(4) Sensor Type : Select the sensor type.
(5) EOL : Select EOL functionality (On / Off).
６
-
２
-
５
Relay
Select the relay type.
６
-
３
Recording
Main setup is
used
to configure the environment of record
ing,
the
system
,
and
its
major
functions. In real-time monitoring, move to
{Menu}
{Setup}
{Recording}
.
Summary of Contents for HDRP16
Page 1: ......
