28
Slide the cylinders off the device’s frame
and replace with new cylinders as shown on
the spares diagram (see point 2.3.1).
If the cylinders require maintenance, replace
the gaskets as described in the next
paragraph.
Replace the cylinders and fix the nut with
medium mechanical resistance thread-
locking glue (e.g. loctite
243)
Reassemble the hydraulic connections
between the cylinder buds and the device’s
hydraulic system.
Reassemble the device on the forkholder
plate of the truck as described in 4.2.3.
Replace the arms as described in 5.4.
Reconnect the device’s hydraulic connection
to the truck and perform a few opening and
closing cycles and side shift cycles (if
present) without a load
