background image

General Safety Instructions

!

 

 

WARNING

Keep any electrical supply cords and the fuel 

supply hose away from any heated surfaces.

!

 

 

WARNING

DO  NOT  use  the  grill  in  garages,  breezeways, 
sheds or any enclosed area. Never operate the grill 
in  enclosed  areas  as  this  could  lead  to  a  carbon 
monoxide  buildup,  which  could  result  in  injury 
or death. Place the grill on a level surface. Avoid 

moving the grill while it is in operation.

!

 

 

WARNING

Always have a qualified service technician perform 

difficult conversions or modifications.

!

 

 

WARNING

Never  attach  an  unregulated  gas  line  to  the 
appliance.  Connection  to  an  unregulated  gas  line 

can cause excessive heat or fire.

!

 

 

WARNING

The  Cylinder  Limit  Handle  must  be  installed  to 
prevent storage of spare L.P. Gas Tanks. Failure to 

comply with these instructions could result in a fire 

or explosion that could cause serious bodily injury, 

death, or property damage.

FOR YOUR SAFETY

DO NOT

 store or use gasoline or other flammable 

vapors  and  liquids  in  the  vicinity  of  this  or  any 
other appliance. 

An 

LP cylinder

 not connected for use shall not be 

stored in the vicinity of this or any other appliance. 

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flames.

3. Open grill hood.
4. If odor continues, immediately call your 

gas supplier and local Fire Dept.

!

 

 

WARNING

This appliance is not intended to be installed in or

on recreational vehicles or boats.

!

 

 

WARNING

CALIFORNIA  PROPOSITION  65  -WARNING: 
The Burning of gas cooking fuels generates some 
by  products  which  are  on  the  list  of  substances 
which  are  known  by  the  State  of  California  to 
cause  cancer  or  reproductive  harm.  California 
law  requires  businesses  to  warn  customers  of 
potential exposure to such substances. To minimize 
exposure to  these  substances,  always operate this 
unit according to the use and care manual, provide 

good ventilation when cooking with gas. 

TESTED IN ACCORDANCE WITH ANSI

Z21.58b-2006/CSA 1.6b STANDARD FOR 
OUTDOOR COOKING GAS APPLIANCES. 
THIS GRILL IS FOR OUTDOOR USE ONLY.

Installation must conform with local codes, this 
unit should  be installed in accordance with the 
National Fuel Gas Code No. Z223.1/NFPA 54, 
National Gas and Propane Installation
Code, CSA B149.1 or Propane Storage and 

Handling Code, B149.2

!

 

 

WARNING

DO  NOT

  try  lighting  this  appliance  without 

reading  the  “ 

LIGHTING  INSTRUCTIONS

” 

section of this manual.

FOR OUTDOOR USE ONLY

3

Summary of Contents for TS29LP



























Reviews: