Copyright 2019 © Cascade Sciences
MAXTRAP 50 & 105 Supplement Instruction Manual Rev 11.29.18
www.cascadesciences.com | [email protected] | 503-847-9047
Hose Connection on the COLDWELL
Filling the Labconco Reservoir
The Shorter KF-25 stub
ALWAYS
connects to the
VACUUM PUMP
The Taller KF-25 stub
ALWAYS
connects to the
VACUUM OVEN
Make sure your have 800 ml of a heat transfer fluid such as ethanol, glycol or a cryocool inside the
thermo reservoir. This fluid is sold separately.
1.
Remove the stainless COLDWELL. Pour the 800ml of heat transfer fluid into the
reservoir that the COLDWELL sits in.
2.
Set the COLDWELL back inside the Labconco reservoir.
3.
Monitor this fluid level during extended periods of use.
Make sure your have 800 ml of a heat transfer fluid such as ethanol, glycol or a cryocool inside the
thermo reservoir. This fluid is sold separately.
