Cascade Sciences CVO-5-EX Series Installation & Operation Manual Download Page 124

Page: 124 / 132

124 |

P a g e

cascadesciences.com

Tel. 503 847-9047

MAINTENANCE

Temperature Calibration Continued

Use the arrow buttons to enter the reference device reading.

•

The temperature calibration function has a range of approximately ±10°C (18°F). For

temperature deviations outside these parameters, contact

Technical Support

Tap the Save button to save the new temperature.

•

The display will automatically return to the Settings menu page.

Tap the Home button to return to the Homepage from the Settings menu.

•

The unit will begin heating or passively cooling to achieve the setpoint temperature.

•

Note:

The Homepage will not immediately show the corrected display temperature.

Reference

Tap

Summary of Contents for CVO-5-EX Series





































































































































Search results

Summary of Contents for CVO-5-EX Series

Reviews:

Cascade Sciences CVO-5-EX Series, Installation & Operation Manual, Page: 124 / 132

Search results

Summary of Contents for CVO-5-EX Series

Reviews: