- Out of direct sunlight
- Do not store in plastic bags as humidity may
form.
Disposal:
- Electric and electronic waste may contain
substances that are dangerous for the environ-
ment and for human health. For this reason they
must never be disposed of together with domestic
waste, but collected separately in specific collec
-
tion centres or returned to the retailer when similar
new equipment has been purchased. The illegal
disposal of such equipment may result in prosecu-
tion to the full extent of the law.
- Do not dispose of used oil with domestic waste,
but take it to the special Collection Centres.
Troubleshooting
Problem
Probable cause
Solution
The chain saw does not start
Lack of power
Check the powe supply
Defective power cable
Check, replace
The chain saw works at inter-
vals, turning on and off
Defective On/off switch
Contact customer service centre
Loosened contact in the chain
saw
Contact customer service centre
Defective power cable
Replace
The chain does not turn
Check that the front hand guard
is not lowered
Push the front hand guard
towards the motor
The chain and bar overheat
Insufficient oil in the tank
Fill
The chain is too tight
Loosen the chain
Clogged air release on cap
Clear the hole in the cap
Oil nozzle or channel clogged
Clean
Chain is dry
Insufficient oil in the tank
Fill with oil
The chain brake does not work
Defective hand guard mecha-
nism
Contact customer service centre
The chain saw does not cut well,
blocks, or makes banging noise
Chain is loose
Adjust the chain tension
Chain is worn
Sharpen or replace
Defective chain
Replace
An oil stain forms under the
chain saw
The chain saw was not cleaned
and the sawdust releases the oil
accumulated during cutting
Clean the saw and remove the
sawdust from the housing
The bar loosens
The wheel was fixed inad
-
equately
Check that the wheel has been
tightened firmly
CS355EA_IM (New).indd 11
2019-03-01 08:53:55 AM
