6
CV072018-1
RECEPTION OF THE MERCHANDISE
Each product is checked carefully before shipment. At the time of reception, check that the product has not been damaged during trans-
port; otherwise, communicate the incident to the carrier. The carrier is responsible for possible
damages derived from transportation. The products are packed in pallets and fixed to it by strips and protective film, or in self-supporting
cardboard boxes, properly fixed to the pallet.
DISPLACEMENT
Before moving the product, make sure that the medium used has adequate capacity. For lifting, use forklifts, lifting the pallet. The maximum
hand lift is specified in the 89/391 / EEC standard and later. It is generally acceptable
a weight of 20 kg below the back but above ground level.
STORAGE
Store the unit in a sheltered place, without excessive humidity and not subject to strong temperature fluctuations, in order to avoid the
formation of condensation inside the unit. Storage is not recommended for a period longer than one year. If more than one year is stored, it
is necessary to check the free rotation of the bearings before installation (turn the turbine by hand).
PROLONGED STOP
In case of prolonged shutdown, with the unit connected to the ventilation system, close the suction / discharge ducts and periodically
check the absence of humidity inside the machine. In case of moisture formation, dry it immediately.
START
UP
Before commissioning, it is advisable to carry out some checks (follow the safety instructions set out in the DISMOUNTING AND ASSEMBLY
section):
- Make sure that there is no condensation inside the unit, and if necessary dry it before putting the unit into operation.
- Check the status of the filters.
- Make sure that the interior of the product has no foreign bodies and that all the components are fixed in their seats.
- Manually test that the turbine does not rub against the suction mouth of the machine.
- Check that the inspection gate is closed.
ATTENTION:
If the mouths of a fan are not properly holed, a suitable protection net must be provided. Check the electrical ground connection. The
electrical connection must be made by qualified personnel.
DISASSEMBLY AND ASSEMBLY
Before starting any operation, make sure that the product is not in operation and can not be fed accidentally or accidentally, and that the
fans are stopped. The disassembly and the corresponding assembly are extraordinary maintenance operations and must be carried out by
qualified personnel.
ELIMINATION
In accordance with the Directive of the European Parliament 2012/19 / EU on waste electrical and electronic equipment (WEEE) “.
The crossed-out wheeled bin symbol on the appliance or on the packaging indicates that the product, at the end of its useful life, must be
disposed of separately from the other waste to allow proper treatment and recycling. The user must, therefore, deliver
free of charge the device, when it reaches the end of its useful life, to the corresponding local centers for selective collection of electrical
and electronic waste, or return it to the distributor according to the following modalities:
- For devices of very small size, or with an exterior side of no more than 25 cm, free delivery without obligation of purchase is foreseen in
the stores with an area of sale of electrical and electronic devices superior to 400 m2. For stores with inferior surfaces, this modality is optio-
nal.
- For appliances with dimensions greater than 25 cm, delivery is foreseen in all the points of sale in the 1-for-1 mode, that is, the delivery
to the distributor may only be made at the time of purchase of a new equivalent product, in reason of one to one. The adequate selective
collection for the subsequent delivery of the discarded device to recycling, treatment and compatible environmental elimination, helps to
avoid possible negative effects on the environment and health and favors the reuse and / or recycling of the materials that make up the
device . The illegal elimination of the product by the user supposes the application of the sanctions foreseen by the current legislation.
