mer service point.
- Always take note of the general safety rules when using electrical equipment.
Maintenance/cleaning notes
- Before carrying out any cleaning or maintenance work, remove the plug or switch off the
electrical equipment!
- Clean the surface of the housing and the guard with a dry cleaning cloth and a damp brush.
- Do not use petrol or any similar light flammable cleaning material.
Storage
- If the fan is not to be used for some time, then store it in a dry room.
- In addiion, you could put a cover on your unit to protect it from dust or dirt deposits.
Disposal
- Remove mains plug
- Cut through the mains cable at the plug
- Dispose of the unit in a proper manner.
Help with faults
Problem
Suggestions for rectification
The heater does not work.
1- Check main and ancillary fuses. It should
be an non-fast acting fuse dimensioned
for the maximum power of your heater.
2- Check heater for correct connection to the
power socket.
3- Check the both switch settings (Standby
and On/Off) at the heater.
If the above information does not fix the problem, unplug the heater by removing the
plug from the wall socket.
In the case of a damage or breakdown, please leave the heater with a qualified electri-
cian to fix the problem.
If the power cord on the unit is damaged it may only be replaced by a repair facility
authorised by the manufacturer. Replacement of the power cord requires special tools.
Attention: Any repairs including replacing the halogen heating lamp should only be
carried out by a qualified electrician or by a recommended service center!
GB
13
