background image

2

Calculation of 32

°

Use the tear-off 

Ceiling Angle Template

 card inserted in the

back of this manual, it provides you with a simple ‘go’ or
‘no-go’ for installing your fan on a sloped ceiling.

SLOPED CEILING INSTALLATIONS

MOUNTING RECOMMENDATIONS

7

 MINIMUM

Pole Length

Standard
Standard

6

12

12

18

24

36

48

Ceiling Height

8

8

 6

9

9

 6

10

11

12

13

14

Suggested Extension Pole Lengths

When to Use Extension Poles

For best performance and best appearance,
an extension pole should be used with
your Casablanca fan when installing on
high (cathedral) ceilings or sloped ceil-
ings. Casablanca offers standard poles in
increments of 6

 up to 5

. Custom poles

are available in lengths up to 10

. See your

Authorized Casablanca Dealer for details.

32°

BLADES MUST BE A

MINIMUM OF 7

ABOVE THE FLOOR

EXTENSION

POLE

MAXIMUM

HANG-TRU®

ANGLE 32º

Before mounting your Casablanca fan, read the following helpful recommendations. The location of the fan, air circulation,
and fan size are all important factors to consider before installation.

Location

Ceiling fans have practical uses in almost every room in your home. We suggest you follow these mount-
ing recommendations as you decide where to install your Casablanca fan.
• For safety reasons, the fan blades must be a minimum of 7

 above the floor.

• Do not locate the fan in a doorway or above a swinging door.
• In any installation, the tips of the blades must be at least 18

 from the wall in order to provide

sufficient clearance for the blades.

• In bedrooms, fans work best when mounted above the foot of the bed.
• Over pool tables, be sure to provide plenty of clearance to avoid damage from pool cues.
• In low ceiling locations, our optional Low Ceiling Adaptor (LCA)—available at

extra cost—can be used to gain 3

1

/

2

.

• In kitchens be sure to allow for open cupboard doors to clear the fan blades.
• Do not install a fan close to, or over, a pool or spa. High humidity combined

with corrosive gases will destroy the finish and warp the blades.

Fan Size

Variable fan speed capability permits the use of a full-size 52

 fan even in

smaller rooms. For very large rooms, two fans may be needed.

EXAMPLE 1

This slope is less than 32˚.
It is OK to install your fan.

EXAMPLE 2

This slope is 32˚.  This is the maximum
slope that will allow the fan to hang
straight down.  It is OK to install your
fan.

EXAMPLE 3

This slope is more than 32˚.
Your fan will not hang straight down, an
adaptor is necessary.  Contact your local
Authorized Casablanca Dealer in regards
to purchasing a “Slope Ceiling Adaptor.”

Note:

 Fan may wobble or vibrate if

pole length is not long enough and
inside blade is too close to downslope
or side wall. Extending pole length
will usually solve problem.

Summary of Contents for UTOPIAN











Reviews: