5
M
alibu
S
tar
®
CROSSBAR MOUNTING BRACKET INSTALLATION
CANOPY & BLADE HARDWARE
CANOPY INSTALLATION
CAUTION: To reduce the risk of personal injury,
use only the mounting hardware provided with the
approved outlet box to install the crossbar mounting
bracket.
Proceed with installation as follows:
Step 2. Route the wires from the ceiling outlet box through the
crossbar mounting bracket center hole. Attach the bracket, with
ground wire and ridges down, to the ceiling fixture outlet box
with the mounting hardware included with the outlet box.
Tighten the screws firmly
by hand only
, being careful not to
bend the bracket by over tightening.
Ceiling Fan
Approved
Outlet Box
Ceiling
Wiring
Crossbar
Mounting
Bracket
Flat
Washer
Outlet Box
Mounting
Hardware
Green
Ground
Wire
Ridge
Side
Down
Canopy
Hatch
Canopy
Canopy Screw (4)
Canopy
Lock Washer (4)
Wire
Nut (3)
W-80 or
W-81
Control
Allen Hex
Key
Crossbar Mounting
Bracket Installed
Canopy
Canopy Lock
Washers
Canopy
Screws
Step 3.
Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2-
½
long canopy screws and canopy
lock washers.
Tighten the screw firmly
by hand only
.
NOTE: On sloped ceilings, align the canopy opening towards
the top or room peak.
