6
CANOpY HATCH INSTALLATION
Step 5.
Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 6.
Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from the
hatch opening.
Tighten the screws firmly by
hand
only,
TILT THE
FAN TO
INSTALL
LAST
CANOpY
SCREW
CANOpY
HATCH
CANOpY
SCREW
LOCK
WASHER
Step 7.
Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.
ATTACH BLADE HOLDERS
Step 8.
Attach the blades to the blade holders by align-
ing the screw holes of the holder with the holes of the
blade.
Attach the blade holder using the four blade screws and
blade washers provided for each blade.
Using the screwdriver, tighten securely by
hand
only.
BLADE
SCREW
BLADE HARDWARE
BLADE
WASHER
BLADE
HOLDER
BLADE
BLADE
SCREW
BLADE
WASHER
note:
Write down the
Serial Number and the
model number for future
reference.
