4
CEILINg HARDWARE
CROSSBAR mOUNT-
INg BRACKET
WIRE NUT (4)
addiTional hardware
2
1
/
4
″
x 8-32 ROUND HEAD
SCREWS (2)
FLAT WASHER (2)
1
″
x 8-32 ROUND
HEAD SCREWS (2)
CAUTION: To reduce the risk of
personal injury, use only the
mounting hardware provided with
the approved outlet box to install
the crossbar mounting bracket.
CROSSBAR mOUNTINg BRACKET INSTALLATION
CROSSBAR
mOUNTINg
BRACKET
FLAT
WASHER
gREEN
gROUND
WIRE
CEILINg FAN
AppROVED
WIRINg BOX
RIDgE
SIDE
DOWN
CANOpY HARDWARE
CANOpY
CANOpY
HATCH
CANOpY LOCK WASHER (4)
CANOpY SCREW (4)
AppROVED
OUTLET BOX
HARDWARE
proceed with installation as follows:
Step 1.
Route the wires from the ceiling outlet box through
the crossbar mounting bracket center hole. Attach the
bracket, with ground wire and ridges down, to the ceiling
fixture outlet box with the mounting hardware included with
the outlet box.
Tighten the screws firmly by
hand
only, being careful not to
bend the bracket by over tightening.
CEILINg
WIRINg
