5
Step 4.
To hang the fan body in the can-
opy, hold the fan body firmly and insert
the nylon ball into the canopy opening.
Check that no wires were pinched. Rotate
the fan body until the slot in the nylon
ball fits into the pin opposite the canopy
opening.
HANgINg THE FAN
pIN
SLOT
BALL
Step 3.
Attach the canopy to the crossbar mount-
ing bracket with three of the 8-32 x 2
1
/
4
long
canopy screws and canopy lock washers. Hand
tighten until snug against the ceiling.
CANOpY INSTALLATION
CANOpY LOCK
WASHERS
CANOpY
SCREWS
CROSSBAR mOUNTINg
BRACKET INSTALLED
CANOpY
note:
On sloped ceilings, align the
canopy opening towards the top or
room peak.
CANOpY ELECTRICAL CONNECTIONS
Step 5.
Attach the fan wires to the ceiling fixture outlet box
wiring by twisting the bare ends of the wires together and
then securing with a wire nut. Test that the connection is
secure by pulling on the wire nut. Connect in this order:
WIRE NUT
step 5a. versa•touch connections
• GREEN leads from mounting plate and fan to GROUND
conductor of power source. Secure with wire nut.
• WHITE wire from fan to white NEUTRAL wire in ceiling
fixture outlet box. Secure with wire nut.
• BLACK power wire from fan to BLACK power wire in ceiling
outlet box. Secure with wire nut.
versa•touch
CONNECTIONS
2 WHITE WIRES
2 BLACK WIRES
3 gREEN WIRES
A
urorA
™
II
note:
Fan weighs 26.4 lbs.
