11
COLLAR
sWitch
housing
3-SPEED
♦
OPTIONAL LIGHT FIXTURE INSTALLATION
optional light
pull chain
sWitch
REVERSE
sWitch
3-SPEED
♦
OPERATION
Pull-chain switches on the fan control the fan and lights. Using
the fan control pull-chain switch: Fan off at start.
First pull:
fan ON, low speed
Second pull:
medium speed
Third pull:
high speed
Fourth pull:
fan OFF
Using the optional light pull-chain switch: Light off at start.
First pull:
light ON
Second pull:
light OFF
Direction of blade rotation is controlled by the reverse slide switch
on the side of the switch housing.
No changes in household wiring are required.
1. Refer to light kit instructions to assemble and attach your light
kit correctly.
2. Remove the two 8-32 screws from the switch housing cap.
3. Remove the plug from switch housing.
4. Install pull-chain switch and finger tighten collar on switch.
5. Connect one wire from pull-chain switch to the BLUE D1-Option
wire. Secure splice with a wire nut.
6. Connect other wire from pull-chain switch to BLACK wire from light
kit. Secure splice with a wire nut.
7. Connect WHITE wire from switch housing to WHITE wire from light
kit. Secure splice with a wire nut.
8. At the canopy, connect the BLACK and BLUE wires.
3-SPEED OPTIONAL FAN ONLY WALL CONTROLS
The W-40 and W-24 wall controls provide four-speed control of fan from a convenient wall loca
-
tion. The W-40 and W-24 are designed to replace a standard wall switch and will fit wall boxes
with a depth of 2” or greater.
not for use with single pull-chain fan/light option wiring.
3-SPEED OPTIONAL FAN AND LIGHT WALL CONTROLS
The W-80 and W-28 wall controls provide separate control of fan and light with two separate
controls. The W-80 and W-28 are designed to replace a standard wall switch and wall boxes with
a depth of 2” or greater. Requires two hot leads from wall box to ceiling wiring box.
fan & speed con
-
TROL
pull chain sWitch
noTe:
If a separate circuit is used to control the lights from a wall
control, the BLUE D1-Option wire in the canopy should be connected
to that switch leg with the BLACK fan power wire.
3-SPEED OPTIONAL REMOTE CONTROL
Add remote control convenience to Casablanca 3-Speed fans. Adapt•Touch (W-52) easily converts
new or existing Casablanca 3-speed Pull Chain fans equipped with a Hang-Tru canopy. Features
include three fan speeds, instant off, and ful-range light dimming (on models equipped with a
light fixture). The hand-held remote includes a switch plate bracket for wall mounting, and the
receiver is quickly installed in the Hang-Tru canopy. Use one Adapt•Touch to control several
fans, or purchase extra controls to operate a fan from different locacations.
