5
6
AUTO SHUT OFF
MANUAL SHUT OFF
WARNING INDICATORS
1.Replace new battery.
2.Scale overload. Remove item to avoid
damage.Max.weight capacity is indicated
on the scale.
Auto shut-off occurs if display shows
'0' or shows the same weight reading
for 2 minutes.
To maximize battery life, always press
again to turn off the scale after using.
Note: when display shows “0”, press
to turn off the scale;
when display shows weight reading, press
for 3 seconds to turn off the scale.
“ZERO” OR “TARE” FUNCTION
To weigh different loads consecutively without removing loads from the scale.
Put first Load on the scale, get weight reading. Press button to reset
the LCD reading to "0" before adding next load. You can repeat this operation.
Condition 1: "ZERO" function
When total sum of all loads on scale
≤4% of scale's max.weight capacit
y.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
LCD will show ----- or Og each time
is perssed. ----- means not stable, please
wait for a moment. Og and meanwhile an
icon o on the left side of LCD mean ZERO
function is activated. Max.weight capacity
remains unchanged.
Condition 2: "TARE" function
When total sum of all loads on scale
>4% of scale's max.weight capacit
y.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
LCD will show ----- or Og each time
is pressed. ----- means not stable, please
wait for a moment. Og and meanwhile an
icon T on upper left corner of LCD mean
TARE function is activated. Max.Weight
capacity is reduced by total weight of all
loads.
Under this condition:
By pressing , you can see the
total weight of all loads on the scale. If
you want to weigh more loads, just press
to reset LCD reading to '0' again.
