9
GB
- If you do not use the unit for a longer period of time, be sure to unplug it from the mains.
Maintenance/cleaning instructions
Warning:
Disconnect the appliance from the mains supply by unplugging the plug or switching
off the electrical system before carrying out any cleaning or maintenance work. The appliance
must be disconnected from the mains during maintenance and replacement of parts. Disconnect
the plug from the wall outlet so that the operator can be sure that the plug is unplugged at
all times and in all locations.
Warning:
Check the mains cable and the mains plug for damage regularly, but absolutely
before each use. If damage is visible, do not use the device again.
- Routine maintenance must be carried out once a year.
- In case of damage, unusual noise and/or malfunction, switch off the device and do not
manipulate it.
- In case of necessary repairs, contact an authorized service center.
- Clean the surface of the housing and the protective grille with a dry cloth and a soft brush.
Do not use petrol or a similarly inflammable cleaning agent.
- After cleaning, the fan must be completely reassembled.
- Otherwise the fan is maintenance-free.
Storage
- If you are not going to use the fan for a long time, keep it in a dry room.
- You can also cover your unit to protect it from dust or dirt deposits.
Disposal
Important:
Environmental damage due to improper disposal!
- Dispose of electrical waste and batteries according to the regulations in your country.
- Follow the instructions on page 65.
Help with faults
Fault
Cause
Remedy
Blade does not turn.
Main switch setting „OFF“.
Switch on main switch.
Speed setting to „0“.
Switch on unit.
Mains plug not correctly in-
serted.
Insert mains plug.
Household fuse blown/trip
defective.
Check household fuse/trip.
Fuse has blown due to over-
load (motor overheating).
Remove unit from mains supply. Pull
plug from the socket and have the unit
repaired by a specialist or customer
service.
If the fault can not be remedied using the above listed remedies, then the plug has to be
removed from the socket.
A specialist must now establish the cause and carry out the repair work accordingly.
If the mains cable to this unit is damaged, then it can only be repaired by a repair workshop
named by the manufacturer, due a special tool being needed.
Note:
Opening the unit and repairs may only be carried out by a specialist!
Summary of Contents for Airos Big Pin II
Page 55: ...55 RU 8...
Page 57: ...57 0 RU...
Page 61: ...61 Montage Assembly Assemblage Monatggio DE FR EN IT Ensamblaje Mont ES CZ 1 2 3...
Page 62: ...62 fig 2 4 5 6...
