Casa Fan Airos Big Pin II, Mounting And Operating Manual

Page: 8 / 68

8
When dealing with electricity, just conforming to all the safety and
precautionary measures can not describe every danger situation. They
do not replace sensible procedures and care, which you have to take
into account when first initiating and then running your fan.
GB
About this operating instructions
Before using the CasaFan fan, read the operating instructions carefully. Keep the operating
instructions within reach. Never pass the fan onto another person without the operating
instructions.
Explanation of symbols:
Warning:
Electric voltage
Important:
Warns the use of the danger to the life and
health due to electrical voltage. Warns of environmental and material damage.

Describing the CasaFan-Ventilator
The fan is used to circulate the room air, e.g. in offices or apartments. The use in machines,
unprotected outdoors, in garages as well as in rooms endangered by fire and explosion is not
permitted.
Technical data:
AIROS BIG PIN II
Mains voltage:
220 - 240 V, 50 Hz
Power:
40 W
Insulation class/Protection rating: II / IP X0
No of speeds: 3
Sound power level:
min.: 47.7 max.: 60.0
Sound pressure level:
(-3 m under freefield cond.):
min.: 24.7 max.: 37.0
Dimensions Ø x H (mm) 305 x 1040 x 305
Weight (kg):
4.9
Important:
Only operate the unit when completely assembled!
Unpack the CasaFan fan, check if everything is present and for visible signs of damage.
- Dispose of packaging taking the environment into account and keep out of the reach of
children.
Mounting (page 61 - 62)
- Mount the fan as shown in the figures fig.1 - fig.2.
Operation (page 63 - 64)
- After plugging in the mains plug, switch on the device at the main switch ( page 63).
- Select the desired operating speed at the speed switch by pressing it down.
Important:
Danger of overheating! Always leave at least 30 cm distance from the rear of the fan to
the wall.
- After use, switch off the power to the unit at the main switch .