PW-II
Service Manual
10
2.1.1.4.
C4-4 Setting
UNIT CHANGE
Comma Setting
lb ROM Version Only
Buzzer Setting
ENABLE
1XXX XXXX
ENABLE
XXX1 XXXX
ENABLE XXXX
0XXX
DISABLE
0XXX XXXX DISABLE
XXX0 XXXX
DISABLE XXXX
1XXX
C4-4 is to set to use the unit change function and the displaying unit.
2.1.1.5.
C4-5 & C4-6 Setting
2.1.2.
SPAN Calibration Setting (C-3)
(1)
Pressing and holding “Calibration Switch” press [POWER] key.
After “CAL” message blinks three times and shows the version of scale, it displays “C-0”
message.
(2)
Press [TARE] to display “C-3”.
(3)
Press [ZERO] key and then it displays “UnLOAd” message.
(4)
Press [ZERO] key if you want to scroll it.
Ú
To exit from SPAN Calibration mode press [TARE] key when
“
UnLOAd
”
or
“
LOAd
”
message is
displayed.
C4-5
C4-6
Op Amp Setting
Zero Range Setting
HA17358
XXXX
XXX1
2% 10% 15% 20%
OP2177
XXXX XXX0
XXXX XX01
XXXX XX00
XXXX XX10
XXXX XX11
Downloaded from
www.Manualslib.com
manuals search engine
