CAS NT-200A, Operating Manual, Page: 33 / 50

- 33 -
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 ~ 2
0
When the PRINT Key is pressed
1
Automatic accumulation - only
stable state
ENTER
Save &
Go to F08
F07
2
Automatic accumulation - when the
state is OK in the limit mode
UNIT Save & Exit Save & go to Normal Mode
Note 1.
If you want to modify the value which is input in the F01~F07 previously,
r
eset to zero with [ZERO] key and then input the value what you want to
with key.
KEY LOCK
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 or 1
0
Not change the key lock
ENTER
Save &
Go to F09
F08
1
Set the key lock item (L01 ~ L10)
F08 = 1 (Key Lock)
L01 Zero Key
L02
Tare Key
L03
Gross Key
L04 Print Key
L05
Enter Key
L06 Unit Key
L07 Zero Sub Key
L08
Tare Sub Key
L09 Gross Sub Key
ENTER
0 : Not
lock the key
1 : Lock
that key
Sub :
Press for
3 seconds
Select 0 ~ 1
Save & Next
L10
0
or
1
Print Sub Key
UNIT Save & Exit Save & go to Normal Mode
Note 1.
Although key lock is set after setting the value of F08 to 1,
The value of F08(1) is not saved. Always the value of F08 is started to 0.
Same to F09 and F10.
SELECT THE RANGE of PASSWORD TO BE APPLIED