CAS MW-II Series, Owner'S Manual

Page: 7 / 26

8
POWER
Use only DC 9V/300mA adaptor.
Insert the adaptor jack into the outlet
and turn on the scale.
OPERATIONS
■ When you turn on the display, make sure that the platter is empty.
Otherwise, the display will show the
“OL-H” . In this case, make the platter
empty then the scale goes to the zero state.
■ The display indicates if the scale is at zero or if there is a tare entered into the
scale by way of a
ZERO and NET .
■ When the weight of commodity is stable, the display will show the
(STABLE) lamp.
■ When the display is not zero though there is nothing on the platter, press the
ZERO key.
■ If you want to turn on or off back light, press the ON/OFF key for a moment.
It toggles between on and off.
■ When you have the low battery, the display shows
“LowbAt”
5times and
“PwrOFF”
and then power is turned off.
General Weighing
①
The first weight unit is gram.
To use unit (ct). press the MODE key until
the display shows ct.
Place a sample on the platter.
②
③
If you want to print this weight, press the PRINT key.