CAS MW-II Series, Owner'S Manual

Page: 15 / 26

16
2) “P .conch”
Press the MODE key, you wi
①
ll see “P .conch” menu on the display.
Press the SET key, you will see the default.
②
Press the MODE key to change ON or OFF.
③
ON : Character style is controlled by specific print code.
▶
If you change the setting, you have to turn OFF and ON the printer.
Press the SET key to save.
④
If you do not want to save, press the ZERO key.
3) “P .Edtch”
①
Press the MODE key, you will see “P .Edtch” menu on the display.
②
Press the SET key.
③
“1b.21.10” is displayed. See table on 19 page. (print control code)
④
Press the MODE key to go to the right side.
⑤
Press the SET key to go to the right side.
(To go to the left side, press the TARE key.)
⑥
Repeat step ~ steps to set the code you want.
④ ⑤
⑦
Press the SET key to save.
③
Press the SET key.
④
Press the SET key, you will see the default.
⑤
Press the MODE key to change this option.
- KEY : Printing is performed by pressing the
PRINT key.
- AUTO : Printing is performed automatically
when the weight or the unit is changed
and the display is stable..
- StrEAM : Printing is performed continually
⑥
Press the SET key to save.
If you do not want to save, press the ZERO key.
If you do not want to save, press the ZERO key.