CAS MW-II Series, Owner'S Manual

Page: 18 / 26

19
5) Back light - “ S.bAcKL”
Note : If you purchase the scale with back light function, y
▶
ou can see this menu.
①
Press the MODE key, you will see “S.bAcKL” menu on the display.
②
Press the SET key, you will see the default(OFF).
③
Press the MODE key to change option.

OFF : Back light is always Off.
If you press ON/OFF key for a moment, back light is On.

ALL ON : Back light is always On(Default setting).
If you press ON/OFF key for a moment, back light is Off.

ON : Back light is On when a sample is placed on the platter.

3 SEC : Back light is On when a sample is placed on the platter and it is Off in
3 seconds after the weight is stable.

5 SEC : Back light is On when a sample is placed on the platter and it is Off in
5 seconds after the weight is stable.

10 SEC : Back light is On when a sample is placed on the platter and it is Off in
10 seconds after the weight is stable.
In case of 3 SEC, 5 SEC and 10 SEC, back light is On for 1 second when you
※
press any key.
④
Press the SET key to save. If you do not want to save, press the ZERO key.
⑤
To exit setup mode, press the ZERO key twice.
6) Stable - " S.StAbL "
①
Press the MODE key, you will see " S.StAbL " menu on the display.
②
Press the SET key, you will see the default ( Level 1)
③
Press the MODE key to change level.
(The higher the level gets, the faster the stabilization becomes relatively.)
④
Press the SET key to save. if you do not want to save, press the ZERO key.
⑤
To exit setup mode, press the ZERO key twice.
7) Reset - “S.rESEt”
①
Press the MODE key, you will see “S.rESEt” menu on the display.
②
Press the SET key, you will see the default (no).
③
Press the MODE key to change option.

Yes : All options are changed to the default.

No : Do not reset.
④
Press the SET key to save. If you do not want to save, press the ZERO key.