CAS LCH-TCR302, User Manual, Page: 7 / 19

7
Table 3: A list of available pulling tools are shown below
NO. DESCRIPTION QUAN.
1 Scissor Clamp 1(Set)
2 Small Clamp 1(Set)
3 Heavy duty Clamp 1(Set)
4 Big mouth Clamp 1(set)
5 Handy Hook 1(Set)
6 Frame rack clamp 1 (Set)
7 Steel wire 1(Set)
8(9) Chain 2(Piece)
10 Gallus 1(Piece)
11 Double connector 1(pieces)
12 Mini-clamp 1(pieces)
13 Handy Clamp 1(Set)
14 Down pulley assembly 1(Set)
ATTENTION: When operating, do not exceed the Max Load capacity as far as the data
attached on the tools are concerned. Subject to manufacture alterations.
2.2 APPLICABILITY
Frame machine H-100 is used to repair accident vehicles.
Frame machine is used only for repairing the accident vehicles; any other use is to be
considered improper and incorrect.
Any modification of the machine not previously authorized by the manufacturer
absolves the manufacture from damages derived or referable to the aforementioned
actions.