CAS ED Series, User Manual

Page: 22 / 27

23
ERROR MESSAGES
Error
Message
on Display
Description Solution
“Err 0”
The "Err 0" occurs when scale is not stable. Remove unstable facts.
“Err 1”
The "Err 1" occurs when a current zero point has
shifted from the last span calibration.
Please call your CAS dealer.
“Err 3”
The "Err 3" is an overload error. Please remove the weight.
“Err 9”
The "Err 9" is no weight error.
When scale is in counting mode, you must load
the weight.
If you have no weight on your scale,
you can see this error message.
To sample set hour to raise in the petal
which falls a weight.
“Err 14”
The "Err 14" means calibration range is not
correct.
Please call your CAS dealer.
SERIAL INTERFACE