CAS EC-II Series, User Manual

Page: 41 / 76

42
7. User Programming Functions
In counting mode, press
SET
key to enter into USER PROGRAMMING
FUNCTION MODE. After pressing “SET” key, the display shows “PASS WORD”
to prompt to key in a pass word “101010”, then press “Enter” key to confirm the
pass word.
If the pass word is wrong, then the scale can not to enter into User Programming
Function Mode.
★
The display shows “error” to prompt the mistake when the pass word is wrong.
★
If wrong pass word is entered for two times, then the scale will return to counting
mode automatically.
A. Auto. Shut off time span
 When enter into “User Programming Functions” mode, the displays will
indicate as below eventually.
 Press
MOVE
key to revolve the system-preset time span
(2 min., 5 min., 8 min., and OFF),
(
Default setting
: OFF)

Press
CLEAR
key to determine and return to normal counting mode or
press
ENTER
key for determination and move to next.
★
Turn off the scale to return to normal counting mode.