8
7. Press the “temperature selection” set key to enter into temperature set state. Press the set
key once, indicate one corresponding temperature value, and the lamp shows orange color;
there are three selections such as “high temperature”, “middle temperature” and “low
temperature”. (The state lamp lights and it shows green color when sealing operation. If the
state lamp doesn’t light, it means there is no heating sealing selection.) For a special
requirement, please contact the equipment manufacturer.
(For some intelligent series model,
their temperature
selection switches are designed separately, adopting ship-type
three-
position switch, installed separately on panel. For this series
model, its temperature
selection only has two gears, HIGH means
high temperature, LOW means low
temperature, the middle means not heating.)
8. If your machine model is electric cover opening or pneumatic cover opening, we will preset
return-air cover opening time. (The time relay is usually installed inside the machine, its time
generally needn’t change.) Timing can be changed for production requirement.
9. Remarks & Tips: Ways to fast process of vacuum a small item or product using a bigger
chamber is to place a solid block into the chamber as to occupy the chamber space so as to
allow less vacuum time needed due to compact space.
10. IMPORTANT : *** DO NOT BLOCK THE AIR HOLE IN THE CHAMBER***