CAS BP-1100PLUS, Manual

Page: 26 / 39

5. Close the plastic cover.
4) CF card Instruction
BP-1100plus series printers can read the CF Card after installed the CF Card
Adapter. If the built-in memory is insufficient for storing label formats,
graphics or fonts, users can use CF Card as external memory to provide more
memory space.
When using the CF card, please follow the instruction as below:
1.
Please power off the printer before installing or removing CF Card from
the card slot.
2.
The CF Card cannot be used for printer’s external memory until it is
formatted in FAT16. When the printer has detected that the CF card is not
formatted in FAT16, it will beep 3 times and the Status led light will flash
orange.
3.
If user wants to format the CF Card, just press the “FEED” key, and then
the printer will start to format the CF Card in FAT16. When the format is
complete, the LED light will turn to green.
4.
If choose not to format the CF Card, just open the Top Cover of printer
and wait for the turn-on procedure complete.
5.
After the format is complete, a file folder named “CF” would be created
automatically. This folder is for storing all the data from the printer, please
don’t do any change on it.
6.
The specification of CF Card that is supported by the printer is as follow:

Compact Flash Type I

Compact Flash (CF) v1.4 specification

Capacity: 128MB ~ 1GB

File system: FAT16
27