SETUP MENU
53
NOTE:
As you can see from these settings, it is possible to use the Cinema 12
as an analog stereo preamp and as a surround sound preamplifier at the same
time.
SET ANALOG IN LEVEL SETTINGS
This adjustment can be used to adjust 2-channel analog audio input levels for a selected
input. Despite attempts at standardization, analog sources still have a wide range of input
levels. To compensate for this, the Cinema 12 allows independent input level adjustment
for each of the stereo analog audio input connectors when the particular input is set to
analog. Input level adjustment is not available for the 7.1 channel analog audio input
connector.
NOTE: The following selected menus appear on the Cinema 12 Display.
SETUP MENU
INPUTS
To set Analog IN Level:
1.
Press the SETUP button on the remote to enter the “SETUP MENU”.
The “SETUP MENU / LISTENING PROFILES” menu appears on the front panel
display.
2.
Press
the
button on the remote until you reach “INPUTS” on the front panel
display.
The “SETUP MENU / INPUTS” menu appears on the front panel display.
3.
Press the OK button on the remote to enter the “INPUTS” setup menu.
The “INPUTS / Assigned Inputs” menu appears on the front panel display.
4.
Press the
button on the remote until you reach the “SET ANALOG IN
LEVEL” menu.
The “INPUTS / Set Analog In Level” menu appears on the front panel display.
5.
Press the OK button on the remote to enter the “LEVEL ADJUSTMENT” menu.
The “Set Analog In Level / Input 1” menu appears on the front panel display.
6.
Use the
and
buttons on the remote to adjust the level of the INPUT 1. You
can adjust the selected channel level in 1.0 dB steps across a range of -18dB to
+12dB.
Please note that if a particular input has been set to digital coax or
Summary of Contents for Cinema 12
Page 2: ......
Page 29: ...CONTROLS AND DISPLAYS 27 ...