CONTROLS AND DISPLAYS
24
REMOTE CONTROL
This section explains how best to use the remote control to set up and operate the Cinema
12. Refer to the remote control pictures on the following pages. Advanced functions of
the remote control are covered in the separate Universal Programmable Remote Control
manual.
1.
POWER OFF:
Press this button to turn the Cinema 12 OFF.
2.
BAND (AM):
Press this button to switch to the AM frequency band reception.
3.
BAND (FM):
Press
this button to switch to the FM frequency band reception.
4.
BAND (HDAM):
Press this button to switch to the HDAM frequency band
reception.
5.
BAND (HDFM):
Press this button to switch to the HDFM frequency band reception.
6.
TUNER SCAN:
If INPUT is set to AM or FM, use this button to scan frequencies
that have been PRESET. The scan will cycle through the stations, starting with the
current station, one after another with five-second delays.
7.
NAVIGATION/ENTER:
Use the four NAVIGATION buttons to move through
menu options shown on the Cinema 12 display. Press the ENTER button in the center
to confirm selections made in these menus.
8.
AUTO SETUP:
Press this button to start an AUTO SOUND SETUP test on your
system.
9.
ROOM EQ:
Press this button to turn the Room Equalization ON or OFF.
10.
SETUP:
Calls up the Setup Menu on the Cinema 12 display, if active.
11.
INPUT SELECTOR:
Use these buttons to select the desired source for your
Cinema 12.
12.
MUTE:
Press this button to mute the main volume of the Cinema 12.
13.
SURROUND/DATA FORMAT:
Press the PLIIx, SUR. MODE, NEO:96/24, or
CES 7.1 button once to select a surround format. Press the same button again to cycle
through the various processing models available for the selected format.
14.
VOLUME:
Press this button to adjust the volume up and down from –90dB to
+15dB.
15.
INPUT SEEK:
Press this button to auto select the next active audio input source.
Summary of Contents for Cinema 12
Page 2: ......
Page 29: ...CONTROLS AND DISPLAYS 27 ...