manualshive.com logo in svg

Cary Audio Design Cinema 12, Owner'S Manual, Page: 12 / 72

Share
Download
Cary Audio Design Cinema 12 Owner'S Manual Download Page 12

WELCOME 

 

 

10

Resolution Audio and DTS-HD High Res Audio are trademarks of DTS, Inc. © 1996-
2007 DTS, Inc. All Rights Reserved. 
 
 

 

 
DTS was introduced in 1994 to provide 5.1 Channels of discrete digital audio into home 
theater systems. DTS brings you premium quality discrete multi-channel digital sound to 
both movies and music. DTS is a multi-channel sound system designed to create full 
range digital sound reproduction. The no compromise DTS digital process sets the 
standard of quality for cinema sound by delivering an exact copy of the studio master 
recordings to neighborhood and home theaters. Now, every moviegoer can hear the sound 
exactly as the moviemaker intended. 
DTS can be enjoyed in the home for either movies or music on DVD'S, LD'S, and CD'S. 
 
DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, 
Inc. 
 
 

 

 
The advantages of discrete multi-channel systems over matrix are well known. But even 
in homes equipped for discrete multi-channel, there remains a need for high-quality 
matrix decoding. This is because of the large library of matrix surround motion pictures 
available on disc, VHS Hi-Fi tape, and analog Stereo television broadcasts. The typical 
matrix decoder of today derives a center channel and a mono surround channel from two-
channel matrix stereo material. It is better than a simple matrix in that it includes steering 
logic to improve separation, but because of its mono, band-limited surround it can be 
disappointing to users accustomed to discrete multi-channel sound. 
 
Neo:6 offers several important improvements: Neo:6 provides up to six full-band 
channels of matrix decoding from stereo matrix material. Users with 6.1 and 5.1 systems 
will derive six and five separate channels, respectively, corresponding to the standard 
home-theater speaker layouts. Neo:6 technology allows various sound elements within a 
channel or channels to be steered separately, and in a way which follows naturally from 
the original presentation. 
 
Neo:6 offers a music mode to expand stereo or matrix recordings into the five or six 
channel layout, in a way which does not diminish the subtlety and integrity of the original 
stereo recording. 
DTS, DTS-ES Extended Surround, and Neo:6 are registered trademarks of Digital 
Theater Systems, Inc. 
 
 

Summary of Contents for Cinema 12









































































Reviews:

No comments