FEATURES DESCRIPTION
Disarming
Parking
1.Tamper Alert: If you hear four additional siren chirps and light
flashes, please check your car to see whether the security system was
triggered in your absence.
3. Central Lock Automation (Programmable): This function enables your vehicle to automatically lock the
doors upon pressing brake pedal after ignition is on and unlock the doors upon key off. During driving, you may
also press button A to lock or button B to unlock without activating security mode.
4. Automatic Dome Light: The system will turn on the dome light every time you disarm your system. The dome
light will go out 30 seconds later or immediately go out after you turn the ignition on.
2.Security Rearming (Programmable): The system will re-enter into last
arming mode automatically if no door is opened or ignition is still off
within 35s after disarmed by remote. This feature is to protect your car
from theft even when your car is disarmed by accident.
5. Passive Arming and Passive Locking: The system also can be programmed to arm itself automatically (call pass-
ive arming). Once passive arming is enable, the system will arm itself in 40 seconds every time after the system
sees
you turn ignition off and leave your car by opening and closing the doors. If passive locking function is
enable, the system will lock doors at the same time when entering passive arming.
Dome light is turned on
Note:
Multi-Level Security Arming only applies to a single arming cycle. Once the system is disarmed
and then re-armed, all the zones (inputs) will be active again.
1.Press Button once: The siren chirps once. The system is armed. All zones are active. LED indicator
blinks once and then pauses for 2.0 seconds and then repeats.
2.Press Button a second time within 5 seconds: The siren chirps once again. The shock sensor zone is
now bypassed. LED indicator blinks twice with a two-second pause and then repeats.
3.Press Button a third time within 5 seconds: The siren chirps one more time. The Optional sensor zone
(Microwave sensor zone) is now bypassed. LED indicator blinks three times with a two-second pause and
then repeats.
4.Press Button a fourth time within 5 seconds: The siren chirps one more time. The Shock sensor zone and
Microwave sensor zone are now bypassed. LED indicator blinks four times with a two-second pause and
then repeats.
5.Press Button a fifth time within 5 seconds: The siren chirps one more time. The Shock sensor zone,
Microwave sensor zone. Hood Pin Switch input and trunk pin switch input are now bypassed. LED indicator
blinks five times with a two-second pause and then repeats.
SYSTEM INSTALLATION
Summary of Contents for CX990
Page 1: ......
