FEATURES DESCRIPTION
Parking
The shock sensor is built in the communication unit. You can adjust the shocking sensitivity by changing
the position "H" , "M" , or " L" of the adjustment switch on the communication unit.
In arming status: LED flashes the same number as the times of pressing button within 5 seconds.
In turbo state: LED stays solid for 2 seconds, then pause for 2 seconds.
In valet mode: LED stays solid.
ACC, Door, Hood/Trunk triggered: LED stays solid for 0.5 seconds, then pause for 0.5 seconds.
Smart LED Indicator
Your system remote control and communication unit are produced by FM technology at 433Mhz.
This provides a cleaner spectrum with less interference and a more stable signal. Enjoy a phenomenal
increase in range, even in areas with high radio interference.
High Frequency
FEATURES DESCRIPTION
switch
The lights will flash to inform you that some door is not closed well. When temperately parking, such flashing
may warn coming cars to take care. It is suggested to cancel this feature when your car has a dome light delay.
Door Status Warning (Programmable)
This system may remember the status before power off so as to restore the former working status such as arm
mode
disarm mode and Valet mode, even if the power supply is destroyed.
Status Memory
Turn on
Press button for 0.5sec
once of the new remote
Press button for 0.5sec
once of the new remote
This system uses code hopping technology to increase the security of the alarm. In case the remote
falls out of sync with the main control unit, it will fail to operate the system. To re-sync the system,
please remove the battery of the remote, wait for 10 seconds and re-power the remote again, and then
press button , the alarm will automatically re-sync and respond to the remotes normally.
Code Hopping
Summary of Contents for CX990
Page 1: ......
