FCC ID:2ABK7MA202R
IC ID:11629A-MA202R
CONNECTION DIAGRAMS
Stereo Connection
This diagram shows the MA202R connected to 2 speakers in a stereo configuration. The crossover
switch is in the FLAT position. Speakers can be 4-8 Ohms.
This configuration delivers 75 watts into
each 4 Ohm speaker. You can also use 8
Ohm speakers in this configuration
This connection diagram shows
a typical use of the MA202R in
a stereo configuration driving
one left channel and one right
channel speaker. This setup
is ideal for a second zone or
whenever the main speaker in
the room are assembled in a 2
channel configuration
Bridged Subwoofer Connection
This diagram shows the MA202R connected to 1 subwoofer in a bridged configuration. The LEFT
input is the mono input for the bridged configuration and will come from your receiver or
preamplifier’s subwoofer output. The crossover switch is in the LOWPASS position. Crossover
frequency should begin around 100Hz and be fine tuned once the system is playing as it depends
on the frequency response of the other main speakers in your system. The subwoofer should be
no lessthan 8 Ohms.
This connection diagram shows
a typical use of the MA202R in a
bridged configuration driving
a single subwoofer. This
setup is ideal for non powered
subwoofers or the woofer
portion of a multi-element
speaker that has bi-amp
capabilities
This configuration delivers 150 watts into
a single 8 Ohm speaker. You MUST use
a speaker with a minimum of 8 Ohms
nominal impedance for the bridged
configuration!
10
1
2 0 V~
T
5 AL
6
0 Hz 350 W
2 3 0 V~
T
2 .5 AL
5
0 Hz 350 W
0 0
1
2 0 V~
T
5 AL
6
0 Hz 350 W
2 3 0 V~
T
2 .5 AL
5
0 Hz 350 W
0 0
L
O U TP U T
R
L
O U TP U T
R
FCC ID:2ABK7MA202R
IC ID:11629A-MA202R